Renault Laguna III Manual page 3264

FRONT UPPER STRUCTURE
D91
a Symbols A, B, C and D show the adjustment op-
tions.
The black dot in the centre represents the body of
the bolt.
The grey section represents the component to be
adjusted.
The white section represents the adjustment area.
I - PREPARATION FOR THE ADJUSTMENT.
a Remove:
- the front wheel arch liners (see Front wheel arch
liner: Removal - Refitting) (55A, Exterior protec-
tion),
- the front bumper (see Front bumper: Removal -
Refitting) (55A, Exterior protection).
II - ADJUSTMENT WITH THE BONNET AND THE
FRONT HEADLIGHT
a
Note:
The adjustment with the bonnet and the front
headlight is done with the nuts on the front wing
upper attachment mounting with the front wing
removed.
a Remove:
- the headlight on the side concerned (see Head-
light: Removal - Refitting) (80B, Headlights),
Front wing: Adjustment
109496
- the front wing (see 42A, Front upper structure,
Front wing: Removal - Refitting, page 42A-3) .
a Loosen the mountings (5) and (6) .
a Refit:
- the front wing,
- the headlight.
42A-12
42A
128240