Renault Laguna III Manual page 3172

Structural components to be positioned on the repair bench: Description
4 - Front shock absorber upper mounting
The jig supports the underneath of the shock absorber
cup and is centred on the hole (F) of the shock absorb-
er cup.
It is used when replacing:
- a wheel arch,
- a front half unit.
IMPORTANT
This/these point/s help(s) to ensure axle geometry.
This point has a direct influence on the pivot, camber
and castor angles.
GENERAL INFORMATION
124868
5 - Engine mounting
The jig rests on the engine mounting and is centred in
engine mounting securing holes (P1) and (P2) .
It is used with the mechanical components removed for
the replacement of:
- a front half unit.
- the engine mounting.
6 - Engine tie-rod attachment
The jig supports the engine tie-rod attachment mount-
ing and is centred on hole (R) .
40A-42
40A
124869
124867