Renault Laguna III Manual page 3173

Structural components to be positioned on the repair bench: Description
It is used with the mechanical components removed for
the replacement of:
- the engine tie-rod attachment,
- a front half unit.
7 - Radiator mounting cross member mounting
The jig rests under the front side member and is cen-
tred in the threaded hole (H) .
It is used when replacing:
- the front side member completely or partially,
- a front half unit.
GENERAL INFORMATION
124871
8 - gearbox mounting
The jig rests against the front side member and is cen-
tred in the threaded holes (Q1) and (Q2) ,
It is used when replacing:
- the front side member completely or partially,
- a front half unit.
9 - Front impact cross member mounting
The jig rests vertically against the front impact cross
member mounting reinforcement and is centred on the
mounting holes (K3) and (K4) .
40A-43
40A
128239
124871