Renault Laguna III Manual page 3283

FRONT UPPER STRUCTURE
Dashboard cross member: Removal - Refitting
Special tooling required
Car. 1765 Bolt for repositioning the play
compensation bushes of the
dashboard cross member
Tightening torquesm
dashboard cross mem-
ber side bolts
dashboard cross mem-
ber tie rod bolt
dashboard cross mem-
ber bolts
REMOVAL
I - REMOVAL PREPARATION OPERATION
a Disconnect the battery (see Battery: Removal - Re-
fitting) (MR 415, 80A, Battery).
a Remove:
- the front side doors (see 47A, Side opening ele-
ments, Front side door: Removal - Refitting,
page 47A-1) ,
- the dashboard (see Dashboard: Removal - Refit-
ting) (MR 416, 57A, Interior equipment),
- the UCH (see UCH: Removal - Refitting) (MR
415, 87B, Connection unit),
- the steering column (see Steering column: Re-
moval - Refitting) (MR 415, 36A, Steering assem-
bly).
a Unclip the passenger compartment fuse box.
21 Nm
21 Nm
21 Nm
a Disconnect the earths (1) .
a Remove:
- the dashboard cross member flange bolts (2) ,
- the dashboard cross member flange nuts (3) ,
- the dashboard cross member flange (4) ,
- the bolts (5) to the distribution unit,
a Unclip:
- the various cable harnesses,
- the bonnet opening cable.
II - REMOVAL OPERATION FOR PART
CONCERNED
a Remove:
- the dashboard cross member bolts (6) ,
- the dashboard cross member tie rod bolt (7) ,
- the blanking covers (8) .
42A-31
42A
125078
125079