Listing Switch Configuration And Operation Details For Help In Troubleshooting - HP ProCurve 2510 Management And Configuration Manual

Troubleshooting
Diagnostic Tools
C-40
Listing Switch Configuration and Operation Details for Help
in Troubleshooting
The show tech command outputs, in a single listing, switch operating and
running configuration details from several internal switch sources, including:
■ Image stamp (software version data)
Running configuration
■
Event Log listing
■
■ Boot History
Port settings
■
Status and counters — port status
■
■ IP routes
Status and counters — VLAN information
■
GVRP support
■
■ Load balancing (trunk and LACP)
■ Stacking status — this switch
Stacking status — all
■
Syntax: show tech
Executing show tech outputs a data listing to your terminal emulator. How-
ever, using your terminal emulator's text capture features, you can also save
show tech data to a text file for viewing, printing, or sending to an associate.
For example, if your terminal emulator is the Hyperterminal application
available with Microsoft
output to a file and then use either Microsoft Word or Notepad to display the
data. (In this case, Microsoft Word provides the data in an easier-to-read
format.)
To Copy show tech output to a Text File. This example uses the
Microsoft Windows terminal emulator. To use another terminal emulator
application, refer to the documentation provided with that application.
® ®
Windows software, you can copy the show tech