Software Numbers; Application; 19.10 Enter The Code Number - HEIDENHAIN TNC 620 User Manual

19

19.9 Software numbers

Application

The following software numbers are displayed on the control's
screen after the Software version MOD function has been
selected:
Control model: Designation of the control (managed by
HEIDENHAIN)
NC SW: Number of the NC software (managed by
HEIDENHAIN)
NCK: Number of the NC software (managed by
HEIDENHAIN)
PLC: Number or name of the PLC software (managed by
your machine manufacturer)
In the FCL Information MOD function, the control shows the
following information:
Development level (FCL=Feature Content Level):
Development level of the software installed on the control
Further information:
functions)", page 12

19.10 Enter the code number

Application
The control requires a code number for the following functions:
Function
Select user parameters
Configuring an Ethernet card
Enabling special functions for Q parameter
programming
750
"Feature Content Level (upgrade
Code number
123
NET123
555343
MOD Functions | Software numbers
HEIDENHAIN | TNC 620 | Conversational Programming User's Manual | 10/2017