Configuring The Integrated Photonic Line Card To Switch Wavelengths To Local Or Remote Optical Interfaces - Juniper PTX3000 IPLC Features Manual

Related
Documentation
Configuring the Integrated Photonic Line Card to Switch Wavelengths to Local or
Remote Optical Interfaces
Copyright © 2018, Juniper Networks, Inc.
Chapter 5: Switching Wavelengths on the IPLC to Optical Interfaces in a Local or Remote Chassis
To configure the IPLC to switch a wavelength to an optical interface on a remote chassis:
Specify the slot of the local IPLC module and access the IPLC configuration hierarchy.
1.
[edit]
user@host# edit chassis fpc slot
For example, if the IPLC module resides in slot 1:
[edit]
user@host# edit chassis fpc 1 optical-options
Specify the wavelength to switch to the remote optical interface.
2.
[edit chassis fpc 1 optical-options]
user@host# set wavelength
For example, if you want to add or drop wavelength 1550.12 to a remote optical
interface:
[edit chassis fpc 1 optical-options]
user@host# set wavelength 1550.12 switch remote
Verify that the configuration is correct. For example:
3.
[edit chassis fpc 1 optical-options]
user@host# show
wavelength 1550.12 {
switch {
remote;
}
}
If the configuration is correct, save it.
4.
[edit chassis fpc 1 optical-options]
user@host# commit
Understanding How to Configure the Integrated Photonic Line Card on page 9
Bypassing a Wavelength on page 25
Integrated Photonic Line Card Base and Expansion Module Overview on page 3
Understanding the Integrated Photonic Line Card Architecture on page 6
The IPLC is designed to connect the
optical PICs or MICs on the local or remote chassis. Wavelengths configured on the local
IPLC ports are multiplexed and sent over the
ADD
The remote IPLC base module receives the signal on the
the wavelengths to the DROP
optical-options
nm switch remote
ADD and DROP ports on the front panel to compatible
Line OUT
ports on the front panel of the IPLC according to the
port of the IPLC base module.
port and demultiplexes
Line IN
29