5 - 80
BRAKES - BASE
9. Remove the upper parking brake shoe return
spring (2).
10. Remove the expanding lock (4).
11. The parking brake shoe assembly consists of the
following components:
• (1) Adjuster.
• (2) Upper return spring.
• (3) Hold down spring.
• (4) Expanding lock.
• (5) Lower return spring.
INSTALLATION
Note: Coat all bearing and sliding surfaces on the
expanding lock with Anti-seize.
1. Install the parking brake adjuster (1).
2. Install the upper return spring (2).
3. Install the parking brake shoes by placing the
assembly over rear axle shaft flange.
4. Install the hold down spring (3) by using a pair of
needle-nose pliers (2).
ZH