Dil Delayed Incoming Ring Enhancement - Panasonic DBS-576HD Technical Manual

Section 700 - Operation

DIL Delayed Incoming Ring Enhancement

Prior to Version 3.0, a DIL call that was not answered by the Immediate Ringing extension was
simultaneously passed to all other extensions in the MCO if Delayed Ringing was set. Beginning with
Version 3.0, an incoming DIL call that is not answered can be passed to a single Delayed Ring
destination or to all extensions with an MCO key that includes the incoming trunk. If the Delayed
Ringing extension is not answered, the call is forwarded the extension's preprogrammed location
(e.g., Voice Mail, Call Forwarding, etc.) For example:
DIL Immediate
(DIL Destination = 300)
Both Versions
FF2-0-BSSC-031 (DIL Dest. = 300)
1. Call rings on Ext. 300 only
Note:
The program settings in the previous figure can also be used for the following Delayed
Ringing extension destinations:
- Speed Dial
- Hunt Group Number
- Attendant Group Number
- ERA Number
Hardware Requirements
• N/A
Related Programming
• FF2-0-BSSC-03 (Ring Assignment)
• FF2-0-BSSC-04 (Delayed Ring Assignment)
• FF1-0-02-0027 (DIL Delayed Ringing Pattern)
Considerations
• N/A
576-50-700
(DIL Delayed Destination = 301)
Version 2.6
FF2-0-BSSC-0441 (DIL Dest. = 300)
1. Call rings on Ext. 300
2. Call rolls over to Ext. 301, 302 and
303 simultaneously because they have
an MCO key that includes the trunk.
DBS 576 (USA) issued September 2001
Chapter 3. System Features
DIL Delayed
Version 3.0
FF2-0-BSSC-041 (DIL Dest. = 300)
1. Call rings on Ext. 300
2. System can be programmed to ring
Ext. 301 only, or to ring all three
extensions.
3-19