System Event Log-Smtp Configuration - Planet ISW-1022M User Manual

The page includes the following fields:
Object
Syslog Client Mode:
System Log Server IP
Address:
5.4.5.2 System Event Log—SMTP Configuration
Simple Mail Transfer Protocol (SMTP) is the standard for email transmissions across the network. You can configure
the SMTP server IP, mail subject, sender, mail account, password, and the recipient email addresses which the e-mail
alert will send to. There are also five types of
X-Ring Topology Change, and
the authentication mechanism including an authentication step through which the client effectively logs in to the SMTP
server during the process of sending e-mail alert.
Description
Select the system log mode—Client Only, Server Only, or Both.
Client Only: the system event log will only be sent to this interface of the
switch
Server Only: the system log will only be sent to the remote system log
server with its IP assigned.
Both: the system event log will be sent to the remote server and this
interface.
When the 'Syslog Mode' item is set as Server Only/Both, the user has to assign
the system log server IP address to which the log will be sent.
event—Device Cold
Port Event—available to be issued as the e-mail alert. Besides, this function provides
Figure 5-12 SMTP Configuration interface
User's Manual of ISW-1022M
Start, Device Warm
45
Start, Authentication Failure,