Windows Platform Radius Server Configuration - Planet GS-5220-16S8C User Manual
L2+ 24-port gigabit managed switch with hardware layer3 ipv4/ipv6 static routing
Hide thumbs
Also See for GS-5220-16S8C:
- Command manual (433 pages) ,
- Quick installation manual (16 pages) ,
- Quick installation manual (14 pages)
Table of Contents
Advertisement
Buttons
Auto-refresh
: Check this box to refresh the Page automatically. Automatic refresh occurs every 3 seconds.
:
Click to refresh the Page immediately.
: Clears the counters for the selected server. The "Pending Requests" counter will not be cleared by this
operation.
4.11.10 Windows Platform RADIUS Server Configuration
Setup the RADIUS server and assign the client IP address to the Managed switch. In this case, field in the default IP Address
of the Managed Switch with 192.168.0.100. And also make sure the shared secret key is as same as the one you had set at
the Managed Switch's 802.1x system configuration – 12345678 at this case.
1.
Configure the IP Address of remote RADIUS server and secret key.
User's Manual of GS-5220-16S8C & GS-5220-16S8CR
radiusAccClientExtRo
Round-Trip
undTripTime
Time
Figure 4-11-11: RADIUS Server Configuration Screenshot
The time interval (measured in
milliseconds) between the most recent
Response and the Request that matched
it from the RADIUS accounting server.
The granularity of this measurement is
100 ms. A value of 0 ms indicates that
there hasn't been round-trip
communication with the server yet.
260
Advertisement
Table of Contents
