4.3.2 IP Configuration
This section provides the IP Configuration of PoE Injector Hub as the screen in
the IP Configuration object of PoE Injector Hub.
Object
DHCP Client
IP Address
Subnet Mask
Default Gateway
Description
Apply
Reset
If PoE Injector Hub has not received IP address from DHCP server, then user still can connect to the IP
address before changing to DHCP client mode, or user can use Smart Discovery Utility to find out what IP
address set in the PoE Injector Hub is currently.
Figure 4-3-2: IP Configuration Web Page Screen
Description
Allows to disable or enable the DHCP Client function of PoE Injector Hub.
Allows to input new IP Address of PoE Injector Hub.
Allows to input new Subnet Mask Address of PoE Injector Hub.
Allows to input new Default Gateway Address of PoE Injector Hub.
Allows to input new system description of PoE Injector Hub. The maximum length
is 20 characters.
Press this button to take effect.
Press this button to reset IP Configuration to default mode.
Table 4-3-2: Descriptions of the IP Configuration Objects Screen
User's Manual of HPOE-1200G / HPOE 2400G
Figure 4-3-2
25
appears.
Table 4-3-2
describes