Table of Contents
Advertisement
5.4.2 IP Configuration
The switch is a network device which needs to be assigned an IP address for being identified on the network. Users have
to decide a means of assigning IP address to the switch.
The page includes the following fields:
Object
DHCP Client:
IP Address:
Subnet Mask:
Gateway:
Figure 5-4 IP configuration interface
Description
Enable or disable the DHCP client function. When DHCP client function is
enabled, the switch will be assigned an IP address from the network DHCP
server. The default IP address will be replaced by the assigned IP address on
DHCP server. After the user clicks Apply, a popup dialog shows up to inform the
user that when the DHCP client is enabled, the current IP will lose and user
should find the new IP on the DHCP server.
Assign the IP address that the network is using. If DHCP client function is
enabled, this switch is configured as a DHCP client. The network DHCP server
will assign the IP address to the switch and display it in this column.
The default IP is 192.168.0.100 or the user has to assign an IP address
manually when DHCP Client is disabled.
Assign the subnet mask to the IP address. If DHCP client function is disabled,
the user has to assign the subnet mask in this column field.
Assign the network gateway for the switch. If DHCP client function is disabled,
the user has to assign the gateway in this column field.
The default gateway is 192.168.0.1.
38
User's Manual of ISW-1022M
Advertisement
Table of Contents
