Show Dot1X All - Cisco Nexus 7000 Series Command Reference Manual

Show Commands

show dot1x all

To display all 802.1X feature status and configuration information, use the show dot1x all command.
show dot1x all [details| statistics| summary]
Syntax Description
details
statistics
summary
Command Default
Displays global and interface 802.1X configuration
Command Modes
Any command mode
Command History
Release
4.0(1)
Usage Guidelines
You must enable the 802.1X feature by using the feature dot1x command before using this command.
This command does not require a license.
Examples
This example shows how to display all 802.1X feature status and configuration information:
switch# show dot1x all
Dot1x Protocol Version 2
Dot1x Info for Ethernet2/1
-----------------------------------
Sysauthcontrol Enabled
PAE = AUTHENTICATOR
PortControl = FORCE_AUTH
HostMode = SINGLE HOST
ReAuthentication = Disabled
QuietPeriod = 60
ServerTimeout = 30
SuppTimeout = 30
ReAuthPeriod = 3600 (Locally configured)
ReAuthMax = 2
MaxReq = 2
TxPeriod = 30
RateLimitPeriod = 0
(Optional) Displays detailed information about the
802.1X configuration.
(Optional) Displays 802.1X statistics.
(Optional) Displays a summary of 802.1X
information.
Modification
This command was introduced.
Cisco Nexus 7000 Series Security Command Reference
show dot1x all
761