Show Platform Hardware Fed Switch Forward - Cisco Catalyst 3650 series Command Reference Manual

show platform hardware fed switch forward

show platform hardware fed switch forward
To display device-specific hardware information, use the show platform hardware fed switch switch_number
command.
This topic elaborates only the forwarding-specific options, that is, the options available with the show platform
hardware fed switch {switch_num | active | standby } forward summary command.
The output of the show platform hardware fed switch switch_number forward summary displays all the
details about the forwarding decision taken for the packet.
show platform hardware fed switch {switch_num| active| standby} forward summary
Syntax Description
switch {switch_num | active |
standby }
forward summary
Command Modes
Privileged EXEC
Command History
Release
Cisco IOS XE Denali 16.3.1
Usage Guidelines
Do not use this command unless a technical support representative asks you to. Use this command only when
you are working directly with a technical support representative while troubleshooting a problem.
Fields displayed in the command output are explained below.
• Station Index : The Station Index is the result of the layer 2 lookup and points to a station descriptor
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
98
which provides the following:
◦ Destination Index : Determines the egress port(s) to which the packets should be sent to. Global
Port Number(GPN) can be used as the destination index. A destination index with15 down to 12
bits set indicates the GPN to be used. For example, destination index - 0xF04E corresponds to
GPN - 78 (0x4e).
◦ Rewrite Index : Determines what needs to be done with the packets. For layer 2 switching, this is
typically a bridging action
The switch for which you want to display information. You have the
following options :
• switch_num—ID of the switch.
• active—Displays information relating to the active switch.
• standby—Displays information relating to the standby switch, if
available.
Displays packet forwarding information.
Modification
This command was introduced.