Using Rf Interactive Measurement Mode; Reading The Rf Measurement Table - 3Com WX1200 Reference Manual

Wireless lan switch
Hide thumbs Also See for WX1200:
Table of Contents

Advertisement

Using RF Interactive
Measurement Mode
Reading the RF
Measurement Table
7 Click OK to save the changes and close the box.
8 Do one of the following:
To use the RF interactive measurement mode, see "Using RF
Interactive Measurement Mode".
To generate network design information, see "Generating RF
Network Design Information" on page 157.
Click Finish to save the changes and close the wizard.
RF interactive measurement mode is useful when you are troubleshooting
or surveying the coverage areas on the floor. You can quickly measure
signal strengths for any location on the floor.
To use the RF interactive measurement mode
1 Click the
icon in the toolbar.
2 Click any location on the floor. Received signal strength indication (RSSI)
measurements for the selected location appear next to the Floor View.
See "Reading the RF Measurement Table" for information about the
fields in the display.
The projected signal strengths for the planned equipment from that
measurement point are shown in the RF measurement table.
X-Y coordinates for the measurement point and display options are also
available to customize the RSSI table. Using this interactive mode can be
valuable when verifying deployment coverage with a portable WLAN
measurement tool on the floor.
Verifying the Wireless Network
155

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wx2200Wx4400Wxr100

Table of Contents