Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual page 306

description
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
description
To configure a description for the Event Manager policy, use the description command.
Syntax Description
policy-description
Defaults
None.
Command Modes Embedded Event Manager.
Command History Release
NX-OS 4.1(3)
Usage Guidelines
None.
Examples
The following example shows how to configure a descriptive string for the policy:
switch# configure terminal
switch(config)# event manager applet eem-applet
switch(config-applet)# description "Monitors interface shutdown."
switch(config-applet)#
Related Commands Command
show interface
shutdown
Cisco MDS 9000 Family Command Reference
5-14
description policy-description
Configures a descriptive string for the policy. The string can be any
alphanumeric string up to 80 characters. Enclose the string in quotation
marks.
Modification
This command was introduced.
Description
Displays an interface configuration for a specified interface.
Disables and enables an interface.
Chapter 5 D Commands
OL-18089-01, Cisco NX-OS Release 4.x