Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual page 145

Chapter 4 C Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
cd
To change the default directory or file system, use the cd command.
Syntax Description
directory
bootflash:
slot0:
volatile:
Defaults
The initial default file system is flash:. For platforms that do not have a physical device named flash:,
the keyword flash: is aliased to the default flash device.
If you do not specify a directory on a file system, the default is the root directory on that file system.
Command Modes EXEC mode
Command History Release
1.0(2)
Usage Guidelines
For all EXEC commands that have an optional file system argument, the system uses the file system
specified by the cd command when you omit the optional file system argument. For example, the dir
command, which displays a list of files on a file system, contains an optional file system argument. When
you omit this argument, the system lists the files on the file system specified by the cd command.
Examples The following example sets the default file system to the flash memory card inserted in slot 0:
switch# pwd
bootflash:/
switch# cd slot0:
switch# pwd
slot0:/
Related Commands Command
copy
delete
dir
pwd
show file systems
undelete
OL-18089-01, Cisco MDS NX-OS Release 4.x
cd {directory | bootflash: [directory] | slot0: [directory] | volatile: [directory]}
(Optional) Name of the directory on the file system.
URI or alias of the bootflash or file system.
URI or alias of the slot0 file system.
URI or alias of the volatile file system.
Modification
This command was introduced.
Description
Copies any file from a source to a destination.
Deletes a file on a flash memory device.
Displays a list of files on a file system.
Displays the current setting of the cd command.
Lists available file systems and their alias prefix names.
Recovers a file marked deleted on a Class A or Class B flash file system.
Cisco MDS 9000 Family Command Reference
cd
4-5