Autonomous-Fabric-Id (Ivr Topology Database Configuration) - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

Cisco mds 9000 family command reference guide - release 4.x (ol-18089-01, february 2009)
Hide thumbs Also See for AJ732A - Cisco MDS 9134 Fabric Switch:
Table of Contents

Advertisement

Chapter 2
A Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

autonomous-fabric-id (IVR topology database configuration)

To configure an autonomous fabric ID (AFID) into the Inter-VSAN Routing (IVR) topology database,
use the autonomous-fabric-id command. To remove the fabric ID, use the no form of the command.
Syntax Description
fabric-id
switch-wwn swwn
vsan-ranges vsan-id
Defaults
None.
Command Modes
IVR topology database configuration submode.
Command History
Release
1.3(1)
2.1(1a)
Usage Guidelines
The following rules apply to configuring AFIDs to VSANs:
You can have up to 64 VSANs (or 128 VSANs for Cisco MDS SAN-OS Release 2.1(1a) or later) in an
IVR topology. Specify the IVR topology using the following information:
OL-18089-02, Cisco MDS NX-OS Release 4.x
autonomous-fabric-id fabric-id switch-wwn swwn vsan-ranges vsan-id
no autonomous-fabric-id fabric-id switch-wwn swwn vsan-ranges vsan-id
Modification
This command was introduced.
Modified range for fabric-id.
The default AFID of a VSAN is 1.
Each VSAN belongs to one and only one AFID.
A switch can be a member of multiple AFIDs.
AFIDs at a switch must not share any VSAN identifier (for example, a VSAN at a switch can belong
to only one AFID).
A VSAN identifier can be reused in different AFIDs, without merging the VSANs, as long as those
AFIDs do not share a switch.
The switch WWNs of the IVR-enabled switches.
A minimum of two VSANs to which the IVR-enabled switch belongs.
autonomous-fabric-id (IVR topology database configuration)
Specifies the fabric ID for the IVR topology.
For Cisco MDS SAN-OS images prior to Release 2.1(1a), the
Note
fabric-id value is limited to 1. For Releases 2.1(1a) and later
images, the fabric-id range is 1 to 64.
Configures the switch WWN in dotted hex format.
Configures up to five ranges of VSANs to be added to the database.
The range is 1 to 4093.
Cisco MDS 9000 Family Command Reference
2-35

Advertisement

Table of Contents
loading

Table of Contents