File Management; Plug-N-Play (Pnp) - Cisco 350 Series Administration Manual

6
STEP 5

File Management

Plug-n-Play (PNP)

84
• Description—Enter a server description.
• Minimum Severity—Select the minimum level of system log messages to be sent to
the server.
Click Apply. The Add Remote Log Server page closes, the SYSLOG server is added, and the
Running Configuration file is updated.
See Administration: File
Installation of new networking devices or replacement of devices can be expensive, time-
consuming and error-prone when performed manually. Typically, new devices are first sent to
a central staging facility where the devices are unboxed, connected to a staging network,
updated with the right licenses, configurations and images; then packaged and shipped to the
actual installation location. After these processes are completed, experts must travel to the
installation locations to perform the installation. Even in scenarios where the devices are
installed in the NOC/Data Center itself, there may not be enough experts for the sheer number
of devices. All these issues contribute to delays in deployment and add to the operational
costs.
The Cisco Plug-n-Play solution reduces the costs associated with deployment/installation of
network devices, increase the speed of their installation and reduce the complexity of
deployments without compromising the security. Using the Cisco Plug-n-Play solution, you
can perform Zero Touch Installs of the switches in various deployment scenarios and
deployment locations.
Management.
Cisco 350, 350X and 550X Series Managed Switches, Firmware Release 2.4, ver 0.4
Administration
File Management