Clear Install Failure-Reason - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

Chapter 4 C Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

clear install failure-reason

To remove the upgrade failure reason log created during in-service software upgrades (ISSUs) on the
Cisco MDS 9124 Fabric Switch, use the clear install failure-reason command.
If you remove the upgrade failure reason log, then you will not have any information to help you debug
Caution
in the event of an ISSU failure.
Syntax Description
This command has no other arguments or keywords.
Defaults None.
Command Modes EXEC mode.
Command History Release
3.1(1)
Usage Guidelines
This command is supported only on the Cisco MDS 9124 Fabric Switch.
Examples
The following example removes all upgrade failure reason logs on a Cisco MDS 9124 Fabric Switch:
switch# clear install failure-reason
Related Commands Command
show install all
failure-reason
show install all status
OL-18089-01, Cisco MDS NX-OS Release 4.x
clear install failure-reason
Modification
This command was introduced.
Description
Displays the reasons why an upgrade cannot proceed in the event of an
ISSU failure.
Displays the status of an ISSU on a Cisco MDS 9124 Fabric Switch.
clear install failure-reason
Cisco MDS 9000 Family Command Reference
4-55