Attachpriv - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

Chapter 2 A Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

attachpriv

To connect to a specific ILC linecard as a privilege, use the attach module command in EXEC mode.
Syntax Description
module slot-number
Defaults None.
Command Modes EXEC mode.
Command History Release
3.1(3)
Usage Guidelines None.
Examples The following example shows how to connect to a specific ILC linecard as a privilege:
switch# attachpriv module 1
Attaching to module 1 ...
To exit type 'exit', to abort type '$.'
module-1# exit
Related Commands Command
exit
show module
OL-18089-02, Cisco MDS NX-OS Release 4.x
attachpriv module slot-number
Specifies the slot number of the module.
Modification
This command was introduced.
Description
Disconnects from the module.
Displays the status of a module.
Cisco MDS 9000 Family Command Reference
attachpriv
2-29