Clear Cdp - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

clear cdp

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
clear cdp
To delete global or interface-specific CDP configurations, use the clear cdp command.
Syntax Description
counters
table
interface
gigabitethernet
slot/port
mgmt 0
Defaults
None.
Command Modes
Configuration mode.
Command History Release
1.1(1)
Usage Guidelines You can use this command for a specified interface or for all interfaces (management and Gigabit
Ethernet interfaces).
Examples The following example clears CDP traffic counters for all interfaces:
switch# clear cdp counters
switch#
The following example clears CDP entries for the specified Gigabit Ethernet interface:
switch# clear cdp table interface gigabitethernet 4/1
switch#
Related Commands Command
cdp
show cdp
Cisco MDS 9000 Family Command Reference
4-34
clear cdp {counters | table} [interface {gigabitethernet slot/port | mgmt 0}]
Enables CDP on globally or on a per-interface basis.
Specifies the EXEC command to be executed.
(Optional) Displays CDP parameters for an interface.
Specifies the Gigabit Ethernet interface.
Specifies the slot number and port number separated by a slash (/).
Specifies the Ethernet management interface.
Modification
This command was introduced.
Description
Configures global or interface-specific CDP settings and parameters.
Displays configured CDP settings and parameters.
Chapter 4 C Commands
OL-18089-01, Cisco MDS NX-OS Release 4.x