Cloud Discover - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

cloud discover

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
cloud discover
To initiate manual, on-demand cloud discovery, use the cloud discover command.
Syntax Description
interface
gigabitethernet
slot/port
port-channel
port-channel-number
Defaults
None.
Command Modes EXEC mode.
Command History Release
3.0(1)
Usage Guidelines This command is not supported on the Cisco MDS 9124 switch, the Cisco Fabric Switch for HP c-Class
BladeSystem, and the Cisco Fabric Switch for IBM BladeCenter.
Examples The following example initiates manual, on-demand cloud discovery.
switch# cloud discover
The following example initiates manual, on-demand cloud discovery on Gigabit Ethernet interface 2/2.
switch# cloud discover interface gigabitethernet 2/2
Related Commands Command
cloud discovery
cloud-discovery enable
show cloud discovery
show cloud membership
Cisco MDS 9000 Family Command Reference
4-106
cloud discover [interface {gigabitethernet slot/port | port-channel port-channel-number}]
(Optional) Specifies an interface for cloud discovery.
(Optional) Specifies a Gigabit Ethernet interface.
(Optional) Specifies a PortChannel interface. The range for the PortChannel
number is 1 to 256.
Modification
This command was introduced.
Description
Configures cloud discovery.
Enables discovery of cloud memberships.
Displays discovery information about the cloud.
Displays information about members of the cloud.
Chapter 4 C Commands
OL-18089-01, Cisco MDS NX-OS Release 4.x