Configuring Pimv2 Bsr; (Optional) Saves Your Entries In The Configuration File - Cisco Catalyst 2960-XR Configuration Manuals

Configuring PIM
Command or Action
Step 4
end
Example:
Switch(config)# end
Step 5 show running-config
Example:
Switch# show running-config
Step 6
copy running-config startup-config
Example:
Switch# copy running-config
startup-config
Related Topics
Example: Filtering Incoming RP Announcement Messages, on page 72

Configuring PIMv2 BSR

The process for configuring PIMv2 BSR may involve the following optional tasks:
• Defining the PIM domain border
• Defining the IP multicast boundary
• Configuring candidate BSRs
• Configuring candidate RPs
OL-29426-01
Purpose
• For source, enter the multicast group address range for which the RP
should be used.
• (Optional) For source-wildcard, enter the wildcard bits in dotted decimal
notation to be applied to the source. Place ones in the bit positions that
you want to ignore.
The access list is always terminated by an implicit deny statement for everything.
Returns to privileged EXEC mode.
Verifies your entries.

(Optional) Saves your entries in the configuration file.

Catalyst 2960-XR Switch IP Multicast Routing Configuration Guide, Cisco IOS Release 15.0(2)EX1

Configuring PIMv2 BSR

57