Clear Rmon Hcalarms - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

Chapter 4 C Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

clear rmon hcalarms

To clear all the 64-bit RMON alarms from the running configuration, use the clear rmon hcalarms
command.
Syntax Description This command has no arguments or keywords.
Defaults None.
Command Modes
EXEC mode.
Command History Release
3.3(1a)
Usage Guidelines You must save the changes to startup configuration to make them permanent.
Examples The following example clears all the 64-bit RMON alarms from the running configuration:
switch# clear rmon hcalarms
switch#
Related Commands Command
clear rmon all-alarms
clear rmon alarms
clear rmon log
OL-18089-01, Cisco MDS NX-OS Release 4.x
clear rmon hcalarms
Modification
This command was introduced.
Description
Clears all the 32-bit and 64-bit RMON alarms.
Clears all the 32-bit RMON alarms.
Clears RMON log information.
Cisco MDS 9000 Family Command Reference
clear rmon hcalarms
4-79