Clear Port-Security - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

clear port-security

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
clear port-security
To clear the port security information on the switch, use the clear port-security command in EXEC
mode.
Syntax Description database
auto-learn
interface fc slot/port
port-channel port
session
statistics
vsan vsan-id
Defaults None.
Command Modes EXEC mode.
Command History Release
1.2(1)
2.0(x)
Usage Guidelines
The active database is read-only and clear port-security database command can be used when
resolving conflicts.
Examples The following example clears all existing statistics from the port security database for a specified VSAN:
switch# clear port-security statistics vsan 1
The following example clears learnt entries in the active database for a specified interface within a
VSAN:
switch# clear port-security database auto-learn interface fc1/1 vsan 1
The following example clears learnt entries in the active database up to for the entire VSAN:
switch# clear port-security database auto-learn vsan 1
Cisco MDS 9000 Family Command Reference
4-70
clear port-security {database auto-learn {interface fc slot/port | port-channel port} | session |
statistics} vsan vsan-id
Modification
This command was introduced.
Added the session option.
Clears the port security active configuration database.
Clears the auto-learn entries for a specified interface or VSAN.
Clears entries for a specified interface.
Clears entries for a specified PortChannel. The range is 1 to 128.
Clears the port security CFS configuration session and locks.
Clears the port security counters.
Clears entries for a specified VSAN ID. The range is 1 to 4093.
Chapter 4 C Commands
OL-18089-01, Cisco MDS NX-OS Release 4.x