Clear System Reset-Reason - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

clear system reset-reason

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
clear system reset-reason
To clear the reset-reason information stored in NVRAM and volatile persistent storage, use the clear
system reset-reason command in EXEC mode.
Syntax Description This command has no arguments or keywords.
Defaults None.
Command Modes
EXEC mode.
Command History Release
1.3(2a)
Usage Guidelines Use this command as follows for these switches:
•
•
Examples
The following example shows how to clear trusted SSH hosts:
switch# clear system reset-reason
Related Commands Command
show system reset-reason
Cisco MDS 9000 Family Command Reference
4-92
clear system reset-reason
Modification
This command was introduced.
In a Cisco MDS 9500 Series switch, this command clears the reset-reason information stored in
NVRAM and volatile persistent storage in the active and standby supervisor modules.
In a Cisco MDS 9200 Series switch, this command clears the reset-reason information stored in
NVRAM and volatile persistent storage in the active supervisor module.
Description
Displays system reset-reason information.
Chapter 4 C Commands
OL-18089-01, Cisco MDS NX-OS Release 4.x