Clear Rmon All-Alarms - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

clear rmon all-alarms

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
clear rmon all-alarms
To clear all the 32-bit and 64-bit RMON alarms from the running configuration, use the clear rmon
all-alarms command.
Syntax Description This command has no arguments or keywords.
Defaults None.
Command Modes
EXEC mode.
Command History Release
3.3(1a)
Usage Guidelines You must save the changes to startup configuration to make them permanent.
Examples The following example clears all the 32-bit and 64-bit RMON alarms from the running configuration:
switch# clear rmon all-alarms
switch#
Related Commands Command
clear rmon alarms
clear rmon hcalarms
clear rmon log
Cisco MDS 9000 Family Command Reference
4-78
clear rmon all-alarms
Modification
This command was introduced.
Description
Clears all the 32-bit RMON alarms.
Clears all the 64-bit RMON alarms.
Clears RMON log information.
Chapter 4 C Commands
OL-18089-01, Cisco MDS NX-OS Release 4.x