Commit - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

Chapter 4 C Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

commit

To apply the pending configuration pertaining to the Call Home configuration session in progress, use
the commit command in Call Home configuration submode.
Syntax Description This command has no other arguments or keywords.
Defaults None.
Command Modes
Call Home configuration submode.
Command History Release
1.3(1)
2.0(1b)
Usage Guidelines
CFS distribution must be enabled before you can commit the Call Home configuration.
Examples The following example shows how to commit the Call Home configuration commands:
switch# config terminal
Enter configuration commands, one per line.
switch(config)# callhome
switch(config-callhome)# commit
Related Commands Command
callhome
callhome test
show callhome
OL-18089-01, Cisco MDS NX-OS Release 4.x
commit
Modification
This command was introduced.
This command was introduced.
Description
Configures the Call Home function.
Sends a dummy test message to the configured destination(s).
Displays configured Call Home information.
End with CNTL/Z.
Cisco MDS 9000 Family Command Reference
commit
4-113