Clear Ssm-Nvram Santap Module - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

Chapter 4 C Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

clear ssm-nvram santap module

To clear the SANTap configuration for a specific slot stored on the supervisor flash, use the clear
ssm-nvram santap module command in the configuration mode.
Syntax Description slot
Defaults None.
Command Modes
EXEC mode.
Command History Release
3.2(1)
Usage Guidelines None.
Examples The following example shows how to clear the SANTap configuration for a slot 2:
switch# clear ssm-nvram santap module 2
Related Commands Command
ssm enable feature
OL-18089-01, Cisco MDS NX-OS Release 4.x
clear ssm-nvram santap module slot
Displays SANTap configuration for a module in the specified slot.
Modification
This command was introduced.
Description
Enables the SANTap feature on the SSM.
clear ssm-nvram santap module
Cisco MDS 9000 Family Command Reference
4-85