Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual page 244

clock
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Specify the hours-offset argument with a dash before the number; for example,
minutes-offset argument with a dash before the number; for example,
Examples The following example shows how to set Pacific Daylight Time starting on Sunday in the second week
of March at 2:00 A.M. and ending on Sunday in the first week of November at 2:00 A.M:
switch# config t
switch# clock summer-time PDT 2 sunday march 02:00 1 sunday november 02:00 60
The following example shows how to set the time zone to Pacific Standard Time:
switch# config t
switch(config)# clock timezone PST 0 0
Related Commands Command
clock set
show clock
show run
Cisco MDS 9000 Family Command Reference
4-104
Description
Changes the time on the switch.
Displays the current date and time.
Displays changes made to the time zone configuration along with other
configuration information.
Chapter 4 C Commands
. Specify the
-23
.
-59
OL-18089-01, Cisco MDS NX-OS Release 4.x