Action Overbudgetshut - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

action overbudgetshut

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
action overbudgetshut
To configure the shutdown of a module or the entire switch due to an overbudget power condition when
an Embedded Event Manager (EEM) applet is triggered, use the action overbudgetshut command.
Syntax Description number
.number2
module slot
-slot
Defaults None.
Command Modes Embedded Event Manager.
Command History Release
NX-OS 4.1(3)
Usage Guidelines None.
Examples The following example shows how to configure a power overbudget shutdown of module 3-5 when an
EEM applet is triggered:
switch# configure terminal
switch(config)# event manager applet overbudget-applet
switch(config-applet)# action 1.0 overbudgetshut module 3-5
switch(config-applet)#
Related Commands Command
event manager applet
Cisco MDS 9000 Family Command Reference
2-18
action number [.number2] overbudgetshut [module slot [- slot]]
Number can be any number up to 16 digits. The range for number2 is from
0 to 9.
(Optional) Specifies the slot range. The range is from 1 to 10, or a
substituted parameter.
Modification
This command was introduced.
Description
Displays an applet with the Embedded Event Manager.
Chapter 2 A Commands
OL-18089-02, Cisco MDS NX-OS Release 4.x