Show Switchport Voice - Dell Networking 7048 Reference Manual

show switchport voice

Use the show switchport voice command to show the status of Auto-VoIP on
an interface or all interfaces.
Syntax
show switchport voice [gigabitethernet unit/slot/port| port-channel
channel-number | tengigabitethernet unit/slot/port ]
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
There are no user guidelines for this command.
Examples
The following example shows command output when a port is not specified:
console#show switchport voice
Interface
---------
Gi1/0/1
Gi1/0/2
Gi1/0/3
Gi1/0/4
Gi1/0/5
Gi1/0/6
Gi1/0/7
328
Auto-VoIP Commands
Auto VoIP Mode Traffic Class
-------------- -------------
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
6
6
6
6
6
6
6
port-