Target-Parameters; Targets - Juniper JUNOS OS 10.3 - SOFTWARE Manual

Complete Software Guide for Junos

target-parameters

Syntax
Hierarchy Level
Release Information
Description
Required Privilege
Level
Related
Documentation

targets

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
3656
®
OS for EX Series Ethernet Switches, Release 10.3
target-parameters target-parameters-name {
profile-name;
parameters {
message-processing-model (v1 | v2c | V3);
security-level (authentication | none | privacy);
security-model (usm | v1 | v2c);
security-name security-name;
}
}
[edit snmp v3]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Configure the message processing and security parameters to be used in sending
notifications to a particular management target.
The remaining statements are explained separately.
snmp—To view this statement in the configuration.
snmp-control—To add this statement to the configuration.
Defining and Configuring the Trap Target Parameters
Applying Target Parameters
targets {
address;
}
[edit snmp trap-group group-name]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Configure one or more systems to receive SNMP traps.
address —IPv4 or IPv6 address of the system to receive traps. You must specify an address,
not a hostname.
snmp—To view this statement in the configuration.
snmp-control—To add this statement to the configuration.
Configuring SNMP Trap Groups
Copyright © 2010, Juniper Networks, Inc.