Configuring Global Security (Nsm Procedure) - Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING SECURE ACCESS DEVICES GUIDE REV 01 Manual

Table 75: Configuring Secure Meeting Details (continued)
Option Function
Observe DST Allows you to specify the country whose daylight savings
schedules of this time rules the Secure Access device should observe. The
country client uses this setting as a baseline and then adjusts
meeting times for individual users as necessary based on
browser settings and Secure Access device client-side
DST preference settings.
Enable 32-bit (True Allows users to present in true color. By default, Secure
Color) Presentations Meeting presents applications to users using the same
color-depth as the presenter's desktop (up to 32-bit color).
If you do not select this option and a user presents an
application in 32-bit color, however, Secure Meeting
changes the image to 16-bit to improve performance.
Related
Documentation

Configuring Global Security (NSM Procedure)

Copyright © 2010, Juniper Networks, Inc.
Configuring Global Security (NSM Procedure) on page 261
Configuring Sensors (NSM Procedure) on page 265
The default global security settings provide maximum security. However, you may need
to modify these settings if users cannot use certain browsers or access certain web pages.
You can also configure lockout options for protecting the Secure Access device and
back-end systems from DoS/DDoS/password guessing attacks from the same IP address.
To configure global security:
In the NSM navigation tree, select Device Manager > Devices. Click the Device Tree
1.
tab, and then double-click the Secure Access device for which you want to configure
global security.
Click the Configuration tab, and select System > Configuration > Global Security.
2.
The corresponding workspace appears.
Add or modify settings as specified in Table 76 on page 261.
3.
Click one:
4.
OK—Saves the changes.
Cancel—Cancels the modification.
Table 76: Configuring Global Security Details
Option Function
SSL Settings > General tab
Chapter 17: Configuring Secure Access System Management Features
Your Action
Select a country from the drop down list.
Select Enable 32-bit (True Color)
Presentations to enable this feature.
Your Action
261