Unified Access Control Manager; Uac Manager In Nsm Overview; Associating Enforcement Points With An Infranet Controller Using The Uac - Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INFRANET CONTROLLER GUIDE REV 01 Manual

CHAPTER 16

Unified Access Control Manager

UAC Manager in NSM Overview

Copyright © 2010, Juniper Networks, Inc.
UAC Manager in NSM Overview on page 181

Associating Enforcement Points with an Infranet Controller Using the UAC

Manager on page 182
Disassociating the Configuration Between an Enforcement Point and an Infranet
Controller on page 183
Enabling Dot1x Ports on the Enforcement Points Using the UAC Manager on page 184
Disabling the Dot1x Ports on an Enforcement Point Using the UAC Manager on page 185
Opening the UAC Manager in the Configure module of the NSM UI allows you to view
UAC policy attributes from the perspective of Infranet Controllers and enforcement
points.
The Infranet Controller View
The NSM main display area is horizontally divided into two tables. When you select the
Infranet Controller view, the upper table lists all the Infranet Controllers managed by
NSM's current domain. If the Infranet Controllers are in cluster mode, the table also
displays whether they are Active-Active or Active-Passive clusters. Selecting an Infranet
Controller causes NSM to list all the enforcement points and their location groups that
are associated with the selected Infranet Controller in the lower table. If the association
is created with a load balancer option, then the load balancer is also displayed. In
Active-Active cluster mode, the Infranet Controller cluster member name is displayed
but not in the case of Stand Alone and Active-Passive cluster modes. From the Infranet
Controller table, you can edit the configuration of a selected Infranet Controller using
the edit button provided above the Infranet Controller table. The edit dialog is similar to
the edit device action in the Device Manager.
The Enforcement Point View
When you select the enforcement point view, the NSM main display area is horizontally
divided into the enforcement point table at the top and tab views of associated Infranet
Controllers and port details. NSM displays only EX-series switches managed by a current
domain in the enforcement point table. Selecting an enforcement point causes NSM to
populate relevant information in the tab views. From the Infranet Controller tab view,
181