Figure 70: Network Topology For Basic Port Security; Table 367: Components Of The Port Security Topology - Juniper JUNOS OS 10.3 - SOFTWARE Manual

Table 367: Components of the Port Security Topology

Properties
Switch hardware
VLAN name and ID
VLAN subnets
Interfaces in
employee-vlan
Interface for DHCP server
Copyright © 2010, Juniper Networks, Inc.

Figure 70: Network Topology for Basic Port Security

The components of the topology for this example are shown in Table 367 on page 2861.
Settings
One EX3200-24P, 24 ports (8 PoE ports)
employee-vlan
192.0.2.16/28
192.0.2.17
192.0.2.31
ge-0/0/1
ge-0/0/8
In this example, the switch has already been configured as follows:
Secure port access is activated on the switch.
DHCP snooping is enabled on the VLAN
The interface (port) where the rogue DHCP server has connected to the switch is
currently trusted.
Chapter 94: Examples: Port Security Configuration
, tag
20
through
192.0.2.30
is the subnet's broadcast address
, , ,
ge-0/0/2 ge-0/0/3 ge-0/0/8
.
employee-vlan
2861