Configuring Captive Portal Authentication (Cli Procedure); Configuring Secure Access For Captive Portal - Juniper JUNOS OS 10.3 - SOFTWARE Manual

Complete Software Guide for Junos
Table 346: Actions for VSAs (continued)
Option
( |
loss-priority low medium
Related
Documentation

Configuring Captive Portal Authentication (CLI Procedure)

Configuring Secure Access for Captive Portal

2628
®
OS for EX Series Ethernet Switches, Release 10.3
Description
| ) (Optional) Set the packet loss priority (PLP) to
high
both the forwarding class and loss priority.
Filtering 802.1X Supplicants Using RADIUS Server Attributes on page 2618
Understanding 802.1X and VSAs on EX Series Switches on page 2544
Configure captive portal authentication (hereafter referred to as captive portal) on an
EX Series switch so that users connected to the switch are authenticated before being
allowed to access the network. When the user requests a webpage, a login page is
displayed that requires the user to input a username and password. Upon successful
authentication, the user is allowed to continue with the original page request and
subsequent access to the network.
Before you begin, be sure you have:
Performed basic bridging and VLAN configuration on the switch. See "Example: Setting
Up Basic Bridging and a VLAN for an EX Series Switch" on page 1305.
Generated an SSL certificate and installed it on the switch. See "Generating SSL
Certificates to Be Used for Secure Web Access" on page 498.
Configured basic access between the EX Series switch and the RADIUS server. See
"Example: Connecting a RADIUS Server for 802.1X to an EX Series Switch" on page 2545.
Designed your captive portal login page. See "Designing a Captive Portal Authentication
Login Page on an EX Series Switch" on page 2630.
This topic includes the following tasks:
Configuring Secure Access for Captive Portal on page 2628
Enabling an Interface for Captive Portal on page 2629
Configuring Bypass of Captive Portal Authentication on page 2629
To configure secure access for captive portal:
Associate the security certificate with the Web server and enable HTTPS on the switch:
1.
[edit]
user@switch# set system services web-management https local-certificate
my-signed-cert
, , or
low medium high
Copyright © 2010, Juniper Networks, Inc.
. Specify