Spt-Threshold; Ssm-Map - Juniper JUNOS OS 10.3 - SOFTWARE Manual

Complete Software Guide for Junos

spt-threshold

Syntax
Hierarchy Level
Release Information
Description
Required Privilege
Level
Related
Documentation

ssm-map

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
2406
®
OS for EX Series Ethernet Switches, Release 10.3
spt-threshold {
infinity [ policy-names ];
}
[edit logical-systems logical-system-name protocols pim],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
pim],
[edit protocols pim],
[edit routing-instances routing-instance-name protocols pim]
Statement introduced in Junos OS Release 8.0.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Set the SPT threshold to infinity for a source-group address pair. Last-hop multicast
routing devices running PIM sparse mode can forward the same stream of multicast
packets onto the same LAN through an RPT rooted at the RP or an SPT rooted at the
source. By default, last-hop routing devices transition to a direct SPT to the source. You
can configure this routing device to set the SPT transition value to infinity to prevent this
transition for any source-group address pair.
The remaining statements are explained separately.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Configuring the PIM SPT Threshold Policy
ssm-map ssm-map-name;
[edit logical-systems logical-system-name protocols igmp interface interface-name],
[edit protocols igmp interface interface-name]
Statement introduced in Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Apply an SSM map to an IGMP interface.
—Name of SSM map.
ssm-map-name
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Example: Configuring SSM Mapping
Copyright © 2010, Juniper Networks, Inc.