Filter-Specific - Juniper JUNOS OS 10.3 - SOFTWARE Manual

Complete Software Guide for Junos
filter
Syntax
Hierarchy Level
Release Information
Description
Default
Options
Required Privilege
Level
Related
Documentation

filter-specific

Syntax
Hierarchy Level
Release Information
Description
Required Privilege
Level
Related
Documentation
3106
®
OS for EX Series Ethernet Switches, Release 10.3
filter (input | output) filter-name;
[edit vlans vlan-name]
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Apply a firewall filter to traffic coming into or exiting from the VLAN.
All incoming traffic is accepted unmodified to the VLAN, and all outgoing traffic is sent
unmodified from the VLAN.
—Name of a firewall filter defined in a
filter-name
input —Apply a firewall filter to VLAN ingress traffic.
—Apply a firewall filter to VLAN egress traffic.
output
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Example: Configuring Firewall Filters for Port, VLAN, and Router Traffic on EX Series
Switches on page 3039
Configuring Firewall Filters (CLI Procedure) on page 3063
Configuring Firewall Filters (J-Web Procedure) on page 3069
Firewall Filters for EX Series Switches Overview on page 3001
filter-specific;
[edit firewall policer policer-name]
Statement introduced in Junos OS Release 9.5 for EX Series switches.
Configure a policer to act as a filter-specific policer.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration
Example: Configuring Firewall Filters for Port, VLAN, and Router Traffic on EX Series
Switches on page 3039
Configuring Policers to Control Traffic Rates (CLI Procedure) on page 3073
Understanding the Use of Policers in Firewall Filters on page 3036
statement.
filter
Copyright © 2010, Juniper Networks, Inc.