Clear Pim Statistics - Juniper JUNOS OS 10.3 - SOFTWARE Manual

Complete Software Guide for Junos

clear pim statistics

Syntax
Syntax (EX Series
Switch)
Release Information
Description
Options
Additional Information
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
clear pim statistics clear pim statistics
2436
®
OS for EX Series Ethernet Switches, Release 10.3
clear pim statistics
<inet | inet6>
<instance instance-name>
<interface interface-name>
<logical-system (all | logical-system-name)>
clear pim statistics
<inet | inet6>
<instance instance-name>
<interface interface-name>
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
and options introduced in Junos OS Release 10.0 for EX Series switches.
inet6 instance
Clear Protocol Independent Multicast (PIM) statistics.
none —Clear PIM statistics for all family addresses, instances, and interfaces.
—(Optional) Clear PIM statistics for IPv4 or IPv6 family addresses, respectively.
inet | inet6
instance instance-name —(Optional) Clear statistics for a specific PIM-enabled routing
instance.
—(Optional) Clear PIM statistics for a specific interface.
interface interface-name
logical-system (all | logical-system-name)
systems or on a particular logical system.
The clear pim statistics command cannot be used to clear the PIM statistics on a backup
Routing Engine when nonstop active routing is enabled.
clear
show pim statistics on page 2512
clear pim statistics on page 2436
See show pim statistics for an explanation of output fields.
The following sample output displays PIM statistics before and after the
statistics command is entered:
user@host> show pim statistics
PIM statistics on all interfaces:
PIM Message type Received
Hello
Register
—(Optional) Perform this operation on all logical
Sent Rx errors
0 0 0
0 0 0
Copyright © 2010, Juniper Networks, Inc.
clear pim