Lldp - Juniper JUNOS OS 10.3 - SOFTWARE Manual

Complete Software Guide for Junos

lldp

Syntax
Hierarchy Level
Release Information
Description
Default
Required Privilege
Level
Related
Documentation
2694
®
OS for EX Series Ethernet Switches, Release 10.3
lldp {
disable;
advertisement-interval seconds;
fast-start number;
hold-multiplier number;
interface (all | [interface-name]) {
disable;
}
lldp-configuration-notification-interval seconds;
management-address ip-management-address;
ptopo-configuration-maximum-hold-time seconds;
ptopo-configuration-trap-interval seconds;
traceoptions {
file filename <files number> <size size> <world-readable | no-world-readable> <match
regex>;
flag flag (detail | disable | receive | send);
}
}
[edit protocols]
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Configure Link Layer Discovery Protocol (LLDP). The switch uses LLDP to advertise its
identity and capabilities on a LAN, as well as receive information about other network
devices. LLDP is defined in the IEEE standard 802.1AB-2005.
The remaining statements are explained separately.
LLDP is enabled.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
show lldp on page 2769
Configuring LLDP (CLI Procedure) on page 2622
Understanding 802.1X and LLDP and LLDP-MED on EX Series Switches on page 2540
Copyright © 2010, Juniper Networks, Inc.