burst-size-limit
Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
burst-size-limit bytes;
[edit firewall policer policer-name if-exceeding]
[edit logical-systems logical-system-name firewall policer policer-name if-exceeding]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Logical systems support introduced in Junos OS Release 9.3.
Specify the maximum allowed burst size to control the amount of traffic bursting.
—Decimal value or a decimal number followed by k (thousand) or m (million).
bytes
Range:
1 through 2,147,450,880 bytes (EX Series switches)
1500 through 1,00,000,000,000 bytes (routers)
firewall—To view this statement in the configuration.
firewall-control—To add this statement to the configuration.
Example: Configuring Firewall Filters for Port, VLAN, and Router Traffic on EX Series
Switches on page 3039
Configuring Policers to Control Traffic Rates (CLI Procedure) on page 3073
Understanding the Use of Policers in Firewall Filters on page 3036
Rate Limiting
Single-Rate Two-Color Policer Overview
Configuring a Single-Rate Two-Color Policer
Chapter 105: Configuration Statements for Firewall Filters
3097