Chapter 117 Verifying Poe Configuration - Juniper JUNOS OS 10.3 - SOFTWARE Manual

Related
Documentation
Configuring PoE (J-Web Procedure)
Copyright © 2010, Juniper Networks, Inc.
[edit poe]
user@switch# set interface all telemetries
To configure individual interfaces with different settings:
4.
[edit poe]
user@switch# set interface ge-0/0/0 priority high telemetries duration 24
[edit poe]
user@switch# set interface ge-0/0/1
[edit poe]
user@switch# set interface ge-0/0/7 disable
When you configure an individual interface, its configuration overrides any settings
you configure with the
set poe interface all
example above retains the default settings, regardless of any settings configured with
the set poe interface all
Configuring PoE (J-Web Procedure) on page 3317
Example: Configuring PoE Interfaces on an EX Series Switch on page 3307
Example: Configuring PoE Interfaces with Different Priorities on an EX Series Switch
on page 3309
Verifying PoE Configuration and Status (CLI Procedure) on page 3322
PoE and EX Series Switches Overview on page 3303
Power over Ethernet (PoE) ports supply electric power over the same ports that are used
to connect network devices to EX Series switches. These ports allow you to plug in devices
that require both network connectivity and electric power, such as VoIP phones, wireless
access points, and some IP cameras. Using the Power over Ethernet (PoE) Configuration
page in the J-Web interface, you can modify the settings of all interfaces that are
PoE-enabled.
To configure PoE:
Select Configure > Power over Ethernet
1.
The page displays a list of all interfaces except uplink ports. Specific operational
details about an interface are displayed in the Details section of the page. The details
include the PoE Operational Status and Port class.
NOTE: After you make changes to the configuration in this page, you must
commit the changes for them to take effect. To commit all changes to
the active configuration, select
Commit Options to Commit Configuration Changes for details about all
commit options.
command. For example,
command.
.
Commit Options
Chapter 116: Configuring PoE
in the
ge-0/0/1
> . See Using the
Commit
3317