Show Pfe Statistics Traffic Multicast - Juniper JUNOS OS 10.3 - SOFTWARE Manual

show pfe statistics traffic multicast

Syntax
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
Copyright © 2010, Juniper Networks, Inc.
show pfe statistics traffic multicast <fpc fpc-slot>
Command introduced in Junos OS Release 9.5 for EX Series switches.
(On EX8200 switches only) Display class-of-service (CoS) queue information for
multidestination traffic on a physical interface (line card).
NOTE: Multidestination packets include unknown unicast, broadcast, and
multicast packets.
NOTE: To view statistical information for unicast traffic, use the
interfaces queue
fpc fpc-slot —(Optional) Displays class-of-service (CoS) queue information for
multidestination traffic on the physical interface (line card) referred to by the slot
number.
NOTE: On an EX8200 switch, the FPC slot number is the slot number
for the line card. Possible values are
and 0 through
view
show pfe statistics traffic cpu on page 3291
show pfe statistics traffic egress-queues on page 3295
show interfaces queue on page 1256
Monitoring Interface Status and Traffic on page 1167
Understanding Junos OS CoS Components for EX Series Switches on page 3148
show pfe statistics traffic multicast fpc 0 (EX8208 Switch) on page 3298
Table 438 on page 3298 lists the output fields for the
command. Output fields are listed in the approximate order in which they appear.
Chapter 113: Operational Mode Commands for CoS
command.
through
0
15 on the EX8216 switch.
show pfe statistics traffic multicast
show
on the EX8208 switch
7
3297