Authentication-Server; Authentication-Whitelist - Juniper JUNOS OS 10.3 - SOFTWARE Manual

authentication-server

Syntax
Hierarchy Level
Release Information
Description
Default
Options
Required Privilege
Level
Related
Documentation

authentication-whitelist

Syntax
Hierarchy Level
Release Information
Description
Required Privilege
Level
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
authentication-server [server-addresses];
[edit access profile profile-name radius]
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Configure the Remote Authentication Dial-In User Service (RADIUS) server for
authentication. To configure multiple RADIUS servers, include multiple server addresses.
The servers are tried in order and in a round-robin fashion until a valid response is received
from one of the servers or until all the configured retry limits are reached.
Not enabled
—Configure one or more RADIUS server addresses.
server-addresses
admin—To view this statement in the configuration.
admin-control—To add this statement to the configuration.
Example: Connecting a RADIUS Server for 802.1X to an EX Series Switch on page 2545
show network-access aaa statistics authentication on page 2787
Example: Connecting a RADIUS Server for 802.1X to an EX Series Switch on page 2545
authentication-whitelist {
mac-address {
interface interface-name;
vlan-assignment ( vlan-id |vlan-name);
}
[edit ethernet-switching-options]
Statement introduced in Junos OS Release 10.1 for EX Series switches.
Configure MAC addresses for which RADIUS authentication is to be bypassed.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Example: Setting Up Captive Portal Authentication on an EX Series Switch on page 2602
Configuring Captive Portal Authentication (CLI Procedure) on page 2628
Chapter 85: Configuration Statements for Access Control
2661