Groups; Hello-Interval - Juniper JUNOS OS 10.3 - SOFTWARE Manual

Complete Software Guide for Junos

groups

Syntax
Hierarchy Level
Release Information
Description
Default
Options
Required Privilege
Level
Related
Documentation

hello-interval

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
2370
®
OS for EX Series Ethernet Switches, Release 10.3
groups group-prefix;
[edit protocols igmp-snooping vlan vlan-id | vlan-number data-forwarding source]
Statement introduced in Junos OS Release 9.6 for EX Series switches.
Specify the IP address range of the multicast VLAN (MVLAN) source interfaces.
Disabled.
—IP address range of the source group. Each MVLAN must have exactly one
group-prefix
statement. If there are multiple MVLANs on the switch, their group ranges
groups
must be unique.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
[edit protocols] Configuration Statement Hierarchy on page 56
Example: Configuring Multicast VLAN Registration on EX Series Switches on page 2326
Configuring Multicast VLAN Registration (CLI Procedure) on page 2336
hello-interval seconds;
[edit logical-systems logical-system-name protocols pim interface interface-name],
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
pim interface interface-name],
[edit protocols pim interface interface-name],
[edit routing-instances routing-instance-name protocols pim interface interface-name]
Statement introduced before Junos OS Release 7.4.
Statement introduced in Junos OS Release 9.0 for EX Series switches.
Specify how often the router sends PIM hello packets out of an interface.
—Length of time between PIM hello packets.
seconds
Range: 0 through 255
Default: 30 seconds
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Modifying the PIM Hello Interval
hold-time on page 2371
Copyright © 2010, Juniper Networks, Inc.