Igmp-Snooping - Juniper JUNOS OS 10.3 - SOFTWARE Manual

Complete Software Guide for Junos

igmp-snooping

Syntax
Hierarchy Level
Release Information
Description
Default
Required Privilege
Level
Related
Documentation
2372
®
OS for EX Series Ethernet Switches, Release 10.3
igmp-snooping {
traceoptions {
file filename <files number> <size size> <world-readable | no-world-readable> <match
regex>;
flag flag (detail | disable | receive | send);
}
vlan vlan-id | vlan-name {
data-forwarding {
source {
groups group-prefix;
}
receiver {
source-vlans vlan-list;
install ;
}
}
disable {
interface interface-name;
}
immediate-leave;
interface interface-name {
group-limit limit;
multicast-router-interface;
static {
group ip-address;
}
}
proxy ;
query-interval seconds;
query-last-member-interval seconds;
query-response-interval seconds;
robust-count number;
}
}
[edit protocols]
Statement introduced in Junos OS Release 9.1 for EX Series switches.
Enable and configure IGMP snooping on EX Series switches.
The remaining statements are explained separately.
IGMP snooping is enabled by default.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Example: Configuring IGMP Snooping on EX Series Switches on page 2323
Configuring IGMP Snooping (CLI Procedure) on page 2331
Copyright © 2010, Juniper Networks, Inc.