Bandwidth - Juniper JUNOS OS 10.3 - SOFTWARE Manual

bandwidth

Syntax
Hierarchy Level
Release Information
Description
Default
Options
Required Privilege
Level
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
bandwidth bandwidth;
[edit ethernet-switching-options storm-control interface (all | interface-name)]
Statement introduced in Junos OS Release 9.5 for EX Series switches.
Configure the storm control level as the bandwidth in kilobits per second of the combined
broadcast and unknown unicast streams.
NOTE: When you configure storm control bandwidth on an aggregated
Ethernet interface, the storm control level for each member of the aggregated
Ethernet interface is set to that bandwidth. For example, if you configure a
storm control bandwidth of 15000 Kbps on
ge-0/0/0 and ge-0/0/1
Kbps. Thus, the storm control level on
Kbps of combined broadcast and unknown unicast traffic.
If you omit the
bandwidth
the storm control level defaults to 80 percent of the combined broadcast and unknown
unicast streams.
bandwidth —Traffic rate in kilobits per second of the combined broadcast and unknown
unicast streams.
Range: 100 through 10000000
Default: None
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Example: Configuring Storm Control to Prevent Network Outages on EX Series Switches
on page 2793
Understanding Storm Control on EX Series Switches on page 2791
Chapter 91: Configuration Statements for Rate Limiting
, each member has a storm control level of 15000
ae1
statement when you configure storm control on an interface,
, and has two members,
ae1 ae1
allows a traffic rate of up to 30000
2803